Srpski
Abstract
This paper analyses the influence of the current transformer saturation due to high fault currents on secondary current waveform and analyses the operation of differential protection under those conditions. Analysis are performed on relay software model, as well as on the relay itself by injecting currents on relay inputs using test set. The comparison of behavior of software model and physical relay has been performed. Network modeling has been performed in DIgSILENT PowerFactory and relay testing using DOBLE test set.
References
R.E. Cosse, D.G. Dunn, R.M. Spiewak, CT Saturation Calculations – Are They Applicacable in the Modern World? – Part I, The Question, Petroleum and Chemical Industry Conference, 2005
R.E. Cosse, D.G. Dunn, R.M. Spiewak, Stanley E. Zocholl, Terence Hazel, David T. Rollay, CT Saturation Calculations – Are They Applicacable in the Modern World? – Part II, Proposed Responsabilities, Petroleum and Chemical Industry Technical Conference, 2007. PCIC '07. IEEE
B. Kasztenny, J. Mazereeuw, and H. DoCarmo, "CT Saturation in Industrial Applications – Analysis and Application Guidelines," in Proc. the 60th Annual Conference for Protective Relay Engineers, March 27-29, 2007
R.E. Cosse, D.G. Dunn, R.M. Spiewak, James E. Bowen , CT Saturation Calculations – Are They Applicacable in the Modern World? – Part III, Low-Ratio, High-Current CT/Microprocessor Relay Comparisons at a High-Current Testing Laboratory, Petroleum and Chemical Industry Technical Conference, 2008. PCIC 2008. 55th IEEE
Peirre Bertrand, Dr. Michael Mendik, Terence Hazel, Pascal Tantin, CT Saturation Calculations – Are They Applicacable in the Modern World? – Part IV, CT Sizing as per IEC Standards and the Benefits of Non Conventional Instrument transformers, Petroleum and Chemical Industry Conference, 2009. PCIC 2009. 2009 Record of Conference Papers - Industry Applications Society 56th Annual
IEC 60044-1, Instrument transformers – Part 1: Current transformers, International Electrotechnical Commission
IEC 60044-6, Instrument transformers – Part 6: Requirements for protective current transformers for transient performance, International Electrotechnical Commission
C57.13-2007 IEEE Standard requirements for Instrumental Transformers, IEEE Power Engineering Society
C37.110-2007 IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes, IEEE Power Engineering Society
Cahier technique no. 195, Current transformers: specification errors and solutions, Schneider Electric, http://www.schneider-electric.com
Theory for CT SAT Calculator (PSRC), Spreadsheet originated by the IEEE PSRC committee responsible for C37.110 "IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes"
Beyond the Knee Point - A Practical Guide to CT Saturation, Ariana Hargrave, Michael J. Thompson, and Brad Heilman, 72nd Annual Georgia Tech Protective Relaying Conference, Atlanta, Georgia, 2018
Blackburn, J. L., Protective Relaying, Principles and Applications. New York: Marcel Decker, Inc., 1987
www.digsilent.com
Current Transformer (StaCT), Technical Reference Documentation, DIgSILENT PowerFactory 2017
Two-Winding Transformers (ElmTR2, TypTr2), Technical Reference Documentation, DIgSILENT PowerFactory 2017
Transformer Differential Protection / 7UT6, SIPROTEC 4 7UT6 differential protection relay for transformers, generators, motors and busbars, Siemens SIP Edition No. 7
SIPROTEC 4, 7UT6x, Manual C53000-G1176-C230-5, Edition 09.2016
DIgSILENT PowerFactory, Relay Model Description ,Siemens 7UT6xx, Version 002, Technical Reference Documentation
Doble Engineering Company, https://www.doble.com/
TransWin 3.3, User’s Guide, Doble Engineering Company
DIGSI 4, Operation Software for SIPROTEC 4, SIPROTEC Compact, SIPROTEC 3 and SIPROTEC 2 protection devices
Copyright (c) 2021 Proceedings, Electrical engineering institute "Nikola Tesla"
This work is licensed under a Creative Commons Attribution 4.0 International License.