HIGH-VOLTAGE MOTORS ON-SITE TESTING
Abstract
High-voltage motors are one of the most important components in terms of their role and importance for the operation of power plants and industrial facilities. However, they are often not given much attention in terms of preventive maintenance. Maintenance in power plants in Serbia still takes place according to the outdated model of maintenance at time fixed intervals – time based maintenance. This is the reason why emphasis has to be placed on electrical measurements of high-voltage motors in order to have a better insight into their condition, prevent unwanted failures and improve their service. This paper will provide an overview of currently available prophylactic tests of high-voltage motors. Also the most common testing methods will be described, whose measurement results provide information of current condition in order to take possible further repairs or corrective actions. Throughout the whole work itself, it will be presented examples and experiences from practice in power plants in Serbia.
Keywords: High-voltage motors - Electrical measurements.
References
Denis Ilić, Radmila Partonjić, Momčilo Milić, Djordje Jovanović, Ljubiša Nikolić, "Primena EDA metodologije u cilju sagledavanja stanja izolacionih sistema obrtnih masina", Zbornik radova, Elektrotehnički Institut Nikola Tesla, 2016, Volume 26, pp 165-175, DOI: 10.5937/zeint26-12251
LJ. Nikolić , D. Ilić, Đ. Jovanović, M. Milić „Pregled dijagnostičkih ispitivanja statorskih namotaja VN obrtnih mašina“, CIGRE Srbija, 5-8. jun, 2017, Zlatibor, Srbija, 33. savetovanje, A1 10, ISBN 978-86-82317-80-7, http://www.cigresrbija.rs
IEEE 62.2:2004 - IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery
IEC 60034-27-1:2017: Rotating Electrical Machines – Part 27-1: Off-line partial discharge measurements on the winding insulation, ISBN 978-2-8322-5104-1
IEC 60034-27-3:2015: Rotating Electrical Machines – Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
IEEE 43:2013 - Recommended Practice for Testing Insulation Resistance of Rotating Machinery
IEEE 95-2002 Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above)With High Direct Voltage
IEEE 1434:2014 - IEEE GUIDE TO THE MEASUREMENT OF PARTIAL DISCHARGES IN ROTATING MACHINERY
IEEE Std 522-2004 IEEE Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines
Internal Standard: Electrical Power Industry of Serbia – Rotatting Electrical Machines:Electric Insulation Systems (EIS) – Tests for EIS in Service – Periodic Tests, First Edition IS32/1, Oktober 2015.
Copyright (c) 2021 Proceedings, Electrical engineering institute "Nikola Tesla"
This work is licensed under a Creative Commons Attribution 4.0 International License.